skip to Main Content
The smarter way
to do assignments.

Please note that this is just a preview of a school assignment posted on our website by one of our clients. If you need assistance with this question too, please click on the Order button at the bottom of the page to get started.

Prepare a structural steel materials list for the roof-framing plan shown in Figure 1. The columns are 20 feet high. The flange width for the W16×77 is 10 1/4 inches. The properties of the columns are found in Table 1. Determine the number of pounds of steel that need to be purchased for the roof in Figure 1. The columns are 20 feet high. The flange width for the W16×77 is 10 1/4 inches. The properties of the columns are found in Table 1. Table 1Column Properties Column: C1 C2Size W12×40 W12×50Flange Width (in) 8.005 8.080Depth (in) 11.94 12.19 Figure 12. Using the geometric method determine the amount of excavation required for the basement in below Figure 2. The basement measurements are from the outside of the foundation walls. The average depth of the excavation is 7 feet. The footings extend 1 foot outside of the foundation walls, and a 2-foot space between the footing and the sides of the excavation must be provided to form the footings. The soil is excavated at a 1.5:1 (horizontal:vertical) slope. Express your answer in cubic yards.Figure 23. The perimeter of the floor system in below Figure 3 sits on a redwood sill. Determine the number of 16-foot-long pieces of redwood that are needed to complete the floor system. Determine the materials needed to construct the joists and joist headers for the floor system. An engineered rim board is used for the joist headers. Determine the number of 4-foot by 8-foot sheets of 23/32 T&G OSB sheathing that are needed to construct the floor system.Figure 34. Using a waste factor of 8 percent, determine the number of cubic yards of concrete needed to pour and the amount of rebar needed for two of the spread footings in below Figure 4. Allow for two inches of cover.Figure 45. Determine the number of modular bricks needed and labour hours for the wall in below Figure 5. Assume that 675 bricks are required for 100 square feet of wall. Add 4 percent for waste.Figure 5

GET HELP WITH THIS ASSIGNMENT TODAY

Clicking on this button will take you to our custom assignment page. Here you can fill out all the additional details for this particular paper (grading rubric, academic style, number of sources etc), after which your paper will get assigned to a course-specific writer. If you have any issues/concerns, please don't hesitate to contact our live support team or email us right away.

How It Works        |        About Us       |       Contact Us

© 2018 | Intelli Essays Homework Service®

Back To Top